| |
| |
| | |
| Trigger input (1 channel), Logic input (4 channels) or Pulse input (4 channels), Alarm output (4 channels) |
| |
| |
| Date and time, daily cycle, hourly cycle |
| | Start: Data capture starts when a trigger is activated; Stop: Data capture stops when a trigger is activated |
| Start: Off, Input signal level (analog, logic/pulse), External*1, Scheduled time |
Stop: Off, Input signal level (analog, logic/pulse), External *1, Scheduled time |
| Input signal level: Level OR, Level AND, Edge OR, Edge AND |
| H (Rising), L (Falling), Window In*2, Window Out*2 |
| Rising, Falling, Window In*2, Window Out*2 |
| Number of channels: 4, Open collector output (5V, 10 kΩ pull-up resistance) |
| | 50 to 20 M RPM/F.S. (in steps of 1, 2, or 5) |
| 50 to 20 M C/F.S. (in steps of 1, 2, or 5) |
| 50 to 20 M C/F.S. (in steps of 1, 2, or 5) |
| Statistical calculations *4: Average, Peak, Maximum, Minimum, RMS (2 calculations can be set simultaneously) |
| Search function, annotation input function |
| Ethernet (10BASE-T/100BASE-TX), USB (High Speed supported) provided as standard |
| Web server function, FTP server function, NTP client function |
| USB drive mode (File transfer and deletion from internal GL900 memory) |
| | One million data points / Internal flash memory:Approx. 256 MB |
| USB memory slot (High speed supported) *5 |
| Waveforms + digital values, enlarged waveforms, digital values + calculation results, X-Y |
| |
| 0 to 40℃, 5 to 85% R.H. (15 to 35℃ when using batteries) |
| Between each input channel and GND: 1000 V p-p for one minute, between input terminals: 1000 Vp-p for one minute |
| | 100 to 240 VAC, 50 to 60 Hz |
| |
| |
| 42VA (when operating and charging battery with AC power) | 40VA (when operating and charging battery with AC power) |
| 232 x 150 x 80 mm (W x H x D), approx. |
| 1.1 kg (excluding AC adapter and battery) | 1.0 kg (excluding AC adapter and battery) |
Vibration-tested conditions | Equivalent to automobile parts Type 1 Category A classification |